Elory 3418
  • Elory 3418

Elory 3418

Width

34 1/4

height

17 1/2

Depth

3 1/2

Wattage

240

Amps

2.10

Volts

115

BTUs

818

FINSHES

  • Polished
  • Brushed

SKU

  • E3418P
  • E3418B

THIS MODEL HAS BEEN DISCONTINUED. AVAILABLE WHILE SUPPLIES LAST.

The Elory 3418 heated towel rack features a modern single-panel with a large surface area is perfect for drying and warming towels. The integrated Digital Heat Controller allows the choice of 9 temperature settings.

  • Suitable for 1-2 full-size towels (folded)
  • Integrated Digital Heat Controller to choose between 9 different heat output levels
  • Unit is hardwired (requires an electrician to install)
  • Designed to be on continuously (energy efficient design)
  • Heats with an internal cable
  • Mount in any orientation

FAQ

What is the main purpose of a heated towel rack

  • Towel warmers have a variety of uses and applications. They are primarily used to heat towels and bathrobes so they are warm when drying off after a shower or leaving the pool/beach/spa.
  • After a towel is used, the towel warmer will dry it out. This helps to prevent them from giving off that musty/moldy smell they can produce when not dried properly. It also reduces laundry loads and water consumption, as the towels won’t need to be washed as frequently.

How do your heated towel racks work?

  • ANTUS, ELORY, QUADRO, SIRIO and VEGA models heat by way of a new patented technology that uses thick cables that heat up, throughout the unit (both vertical and horizontal bars).
  • JEEVES and TRADITIONAL models have a liquid (Glycol & Water mixture) and heating element inside the unit. The heating element heats up the liquid, in turn heating the bars.
  • RADIANT, SOLO and SWIVEL models use a resistance wire that heats the bars

How long do your heated towel racks take to heat up?

  • Our Italian collections (ANTUS, ELORY, QUADRO, SIRIO, and VEGA) take about 10–20 minutes to heat up, regardless of the size.
  • The JEEVES and TRADITIONAL collection takes between 30–45 minutes to heat to its top temperature, depending on the size.
  • The RADIANT, SOLO and SWIVEL collections take about 10–20 minutes to heat up.
  • Note: The ambient temperature, the size of the room, etc can have an effect on this time. Amba Products is unable to give an approximate time of how long a towel(s) will take to dry. This time will vary depending on numerous variables.

Can a heated towel rack be left on constantly? Do they consume a lot of energy? Are they safe to use?

  • The JEEVES units have a built in thermostat and internal thermal cutout for optimal energy consumption and safety. Once the unit reaches the ideal operating temperature, it then cycles itself to maintain this temperature. This allows them to be left on continuously, only drawing power to maintain the ideal temperature range. If for any reason it overheats, there is an internal safety cutout that will shut off the unit. A switch should always be added so the units can be switched off when not in use.
  • The ANTUS, ELORY, QUADRO, SIRIO & VEGA models come equipped with the Digital Heat Controller (except the Quadro Q 2016 and Sirio S2121). The Digital Heat Controller allows the user to adjust the unit within 9 settings, with level 9 being the highest. If the towel warmer is going to be turned on continuously with a towel, we recommend setting it on no higher than level 7. If you have it on a programmable timer for only a couple hours at a time, any setting can be used. The programmable timer will also help reduce power consumption.
  • For all other collections, once the units reach their top temperature, they will remain at that temperature and won’t fluctuate. You may add a timer to the units to better control energy consumption while still maintaining full use of the towel warmer (see accessories section below for more information on these items).
  • The units should be installed by a certified electrician according to the local electrical code. Most wiring in bathrooms today are already GFCI (ground fault circuit interrupter) equipped, which is an inexpensive electrical device that prevents the risk of electrocution.

What is the best way to place a towel on a heated towel rack?

  • We recommend folding your towel in half or thirds, depending on how large your towel is, and drape it over the top bar so the towel hangs down evenly on either side. This allows you to maximize the surface area contact between the towel and bars.
  • We do not recommend weaving the towel through the bars because this only utilizes half of the surface area of the bars.

What if the heated towel rack is too cold/hot?

  • JEEVES Collection: If the towel warmer is too cold for your liking, you can leave it on for longer periods of time. Do not use 15/30/60min timers, as they will not allow sufficient time for the unit to heat to its top temperature. If the unit has been on for at least an hour and is cold to the touch (i.e. little to no heat) you should contact our customer service department for troubleshooting. The Jeeves units are supposed to heat to 145°F – 154°F with an internal security cut-off at 158°F; this unit is equipped with an internal thermostat that is not adjustable. You should be able to grab and hold onto the bars without burning the skin, while still feeling very hot to the touch.
  • Italian Collection (ELORY, QUADRO, SIRIO, VEGA, and ANTUS): If the towel warmer is too hot for your preference, the Digital Heat Controller (standard on all models except Q 2016/S2121; see accessories below) allows you to adjust the heat level with 9 settings. These collections top temperature ranges between 131° – 167°F. If the units do not heat at all, you should contact the customer service department for troubleshooting.
  • RADIANT and SOLO Collections: These collections heat up to a top temperature of 149°F. It is not possible to adjust the temperature settings.
  • SWIVEL Collection: These units heat up to a top temperature of 136°F, and it is not possible to adjust the temperature setting.

What finishes are available?

  • JEEVES: Polished SS, Brushed SS, Oil Rubbed Bronze, and White
  • QUADRO & SIRIO: Polished SS, Brushed SS and Oil Rubbed Bronze
  • ANTUS, ELORY VEGA, FREESTANDING and SWIVEL: Polished SS and Brushed SS
  • TRADITIONAL collection is offered in 1 finish: Polished Nickel
  • All finishes are the same price for any model

What is the difference between an electric and a hydronic heated towel rack?

  • An ELECTRIC heated towel rack is heated by an electrical heating system (see ‘how do our heated towel racks work?’ above for difference in the heating process) that heats the bars. Electric units can be installed anywhere there is an electrical source. They are very simpler to install, and can be used all year round. All models offered come standard in the electric version.
  • A HYDRONIC unit is heated by hot water via a radiator system or boiler. The hydronic unit is controlled by a valve that lets the hot water flow through the heated towel rack, heating it and consequently the towels. The down side of the hydronic system is that when the radiator system or boiler is not in use the heated towel racks cannot be used. We offer hydronic versions of our heated towel racks as special order items.

Do your Heated towel racks come with Switches?

  • Our Italian heated towel rack Collections (ANTUS, ELORY, QUADRO, SIRIO, and VEGA) come with a Digital Heat Controller (except Q2016 & S2121) that has a built in on/off button. The Q2016 and S2121 will come with a simple push button on/off switch
  • The JEEVES and TRADITIONAL Collections do not come with a built-in switch. We offer separate switches/timers that allow you to place it in the most convenient position for your application. It also enables you to match the switch to the other fittings and décor of the room. These units work with our 7day/24hr programmable timer (ATW-T24) or the simple rocker pilot switch (ATW-S-W/A). We have a double-gang faceplate (JEEVES ONLY) that allows you to install the switch or timer next to the unit.
  • The RADIANT, SOLO and SWIVEL collections come with integrated on/off switches on the unit.

Your products have the electrical wiring on the bottom right hand side of the heated towel rack; can you order the unit with the wiring on the left hand side?

  • Yes, it is possible for the following collections:
  • The JEEVES and TRADITIONAL can be wired on the left in-house by special order
  •  The Italian towel warmers (ANTUS, QUADRO, SIRIO, and VEGA) are Special Order items that have a 10-14 week lead time

Are there additional uses for a heated towel rack?

  • They can be used to dry delicate clothing that cannot be tumble dried (with our digital heat controller accessory).
  • Dry wet boots, jackets, gloves or shoes by hanging them on robe hooks.
  • Help bathrooms stay warm, dry, mold, mildew and humidity free. Some models also double as radiators or space heaters.

Are Heated Towel Racks only for bathrooms?

  • No! Towel warmers can be used in almost any type of application. We offer an expansive collection of towel warmers that can double as space heaters.
  • They can be used in Mud rooms, Saunas, Spas, Pool Houses, Kitchens, Garages, Basements, on Boats, or in any room that may need additional heat.
  • In some cases, they may also act as the sole source of heat in a room; for example – a finished basement where dropping the ceiling to add central heating/air is not possible or too costly.

Do you have Custom and Special Order Units?

  • Looking for a more unique look, style, shape or size? We also offer Special order Heated Towel racks available in our QUADRO, ELORY, SIRIO, VEGA and ANTUS collections – available in polished and brushed finish.
  • Hardwiring can be switched to the left side of the QUADRO, SIRIO, VEGA, ANTUS collections— These are considered Special Orders and carry a 10-14 week lead time.
  • The JEEVES Collection can be hardwired on the left side for an extra cost
  • Hydronic versions: we offer the QUADRO, ELORY, SIRIO, VEGA and ANTUS collections as well as the JEEVES Collection as hydronic models — These are considered Special Orders and carry a 10-14 week lead time.

 

ALL Special Order items require a 100{e058ea6185fe6421d0eaf8df0395bcafe52050c9bf83c80d471262d82d5e9a29} deposit prior to placing the order. All special order items carry a 10-14 week lead-time beginning on the date the deposit is received by Amba Products.

Can heated towel racks be used outdoors?

  • The concern with installing a towel warmer outdoors is the exposure to the elements, notably rain, snow, condensation or ice. If there is a possibility that water can get behind the faceplate and into the electrical wiring it can cause the unit to short circuit. If the unit is properly installed in a covered location, it could be protected and not face any problems, but there is always a risk.
  • If the unit is wired in a covered pool area, we recommend using outdoor weather-proof wire connectors such as those by Ideal Industries (www.idealindustries.com) and sealing the faceplate with silicone and/or the use of a single-gang box gasket.
  • If you are within a close proximity to the beach, or salty water/air, we strongly recommend protecting your towel warmer from these conditions.  Frequently cleaning the unit to remove any salt residue or buildup is highly recommended to preserve the look and finish.
  • We do have a FREESTANDING towel warmer, the SOLO, which comes with a cord and plug that can be used outdoors when wanted, and then brought indoors when it is no longer needed.

What differentiates Amba’s Heated Towel Racks from similar products?

  • Amba’s mission is to deliver high quality products at an affordable price. Our products are made from solid 304 Stainless Steel, not mild steel. Further, our products are not plated and will not flake, a common problem amongst chrome or nickel-plated materials. Only our Traditional Collection is made of nickel plated brass, due to a demand for more traditional styling and materials.
  • The majority of our Amba Heated towel racks are made with high quality Italian heating technology.
  • Amba has fastest and most efficient cable heating systems available for heated towel rack, designed & made in Italy.
  • Amba offers a wide range of styles, sizes and finishes of Heated towel racks. If we do not have anything that matches your desire, we also have Special Order Sizes
  • Amba has very competitive pricing.
  • We pride ourselves on customer service and satisfaction. We will always go above and beyond to make you happy and satisfied with your product. If you have a question or problem, please reach out to us and we will be happy try and help you out.

How does the warranty process work?

  • For any towel warmer that you believe has a warranty issue, we recommend that you take some preliminary steps prior to sending the unit back to us to have it inspected. We recommend that you bypass all switches and wire the unit to a 3-prong plug and plug it directly into the wall (an extension cord should be used if no outlet is within close proximity). If the unit begins to heat properly, then it was a bad connection or faulty wiring/switch (Q 2016 or S2121) that has caused the problem.
  • If the unit is still not functioning accordingly, then please contact customer service and they will help you with your problem. To expedite the warranty procedures, please have a copy of your order confirmation or proof of purchase available.

Do you certify your products? Why?

  • Our products are certified by Underwriter Laboratory (UL) and Intertek (ETL) – approved for use throughout USA & Canada.
  • Product certification is the result of an independent, third party testing and certification process. Certified products provide credible evidence that they comply with standards for safety and performance.

Can I convert a Hardwired model to a plug-in?

Though it is possible to splice an outlet plug onto any hardwired units to utilize it as a plug-in model, this would be considered modifying the unit and WILL VOID THE WARRANTY.

We do not recommend modifying any electrical components, especially without the supervision of a professional electrician. Amba Products can not be held responsible for any damages that occur due to modifications such as this.

INFO

  • 34 1/4
  • 17 1/2
  • 3 1/2
  • 240
  • 818
  • 2.10
  • 131–167F
  • N/A
  • N/A
  • 27
  • 125
  • 3 Years